Fitment

• Talaria MX5 – Chain cut required
• Altis Sigma – Chain cut required

Details

• Gold colored side plates and chromised bearing pins
• Shot peened alloy steel side plates
• Extended bushings reducing the friction between outer and inner link plates and maximizing power output
• Most perfectly matched chain for Renthal Chainwheels allowing maximum power at the rear wheel and extending the life of both the chain and chainwheels
• 4,609 lb. tensile strength
• Master Link included

Installation:

To install this chain it must be “cut” to the correct length which varies depending on the size of your sprocket, OEM is 108 links. You’ll need aChain Breaker Tool which you can buy here. Another very helpful tool is thisspecial plierswhich makes removing and installing master links a snap!

Charged Advice

It’s a well known motocross racing “secret” that an o-ring chain has far more friction in it and robs you of power, you’ll notice a nice little power increase with this chain, perhaps even some range. If you’re racing your buddies, you’ll have a competitive advantage to those running an o-ring chain.

If you upgrade to a larger sprocket and need a longer chain or have a wide tire and you are struggling with chain clearance, here is a simple solution, install a non-o-ring chain which will provide about 1mm of extra clearance between the tire and chain. Be sure to use chain lube and keep your chain clean, without o-rings this is very important.

Renthal is a top name brand in the motocross racing industry known for high quality products.