FEATURES

• Manufactured From Grade 5 Titanium
• Reduces Rotational Mass Unsprung Weight
• Corrosion & Fatigue Resistant
• Each Extended Stud Weighs Approximately 32 Grams

WHEEL STUD SPECS

• Thread Pitch: 12×1.5mm
• Total Length: 78mm
• Thread Length: 50mm
• Head Diameter: 17mm
• Base Thickness: 5mm
• EachStud Weight 32g

Ballade Sports extended wheel studs for Honda M12 x 1.5 are made of grade 5 titanium. These lightweight wheel studs. We ensuresafety and high-quality for this product. Our knurlpattern is 1 mm per knurl. This wheel stud has 37 knurls, for reference Honda original wheel stud has 40 knurls. Lessknurl meansthe stud will have astronger bite when installing into the wheel hub. OEM Honda studs are approximately 36-40g.Wheel Studs will not corrode or rust and they offer 50% in weight savings over OEMsteel studs.

If you use our titanium studs and titanium lug nuts you must use generous amounts of anti-sieze to avoid galling.

Precision 1mmper Knurl/Spline will results in no welding required or spinning of the stud in the hub. 37 Knurls total each stud

Each Extended Stud weighs 32grams. Compare to the factory wheel stud weight of 36-40grams and ARP wheel studs of 60+ grams.

Extended wheel studs are available in sets of 5. Select quantity of 4 to replace all 20 studs.

Single-piece wheel studs are available and are ideal for when replacing only a few old or damaged studs.

Note: Wheel studs must be properly pressed in using a mechanical or hydraulic press.