13-17 Audi B8.5 S5 3.0T Touring Edition Exhaust System – Diamond Black Tips (90mm)

Touring Edition Exhaust:

Our 3.0T exhaust system represents the most comprehensive exhaust development project in our company history. The 3.0T systems have paved the way for future exhaust technologies that can now be found in most every AWE exhaust product. We have spent considerable time and effort during development to achieve remarkable civility when idling and at part throttle cruising, while also producing a war-cry wail when full throttle is applied. Hand made in house, these systems command respect while remaining sophisticated, refined, and powerful, all at once.

AWE’s Pantented 180 Technology:

As exhaust gases exit the 3.0T engine and flow into an AWE 180 Technology equipped resonator, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves re-join the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies. More on AWE’s patented 180 Technology in the tab above.

Made in PA, USA:

Engineered, designed, and manufactured in-house at AWE using US-sourced .065-wall T304L stainless steel to achieve a tone deeper than everyone else.

Installation instructions

Product Details

• Featuring AWE 180 Technology
• Gains of 8 Crank HP and 9 Crank TQ
• Direct Bolt On
• Does not effect or alter any emissions devices, completely street legal
• Available with 90mm or 102mm tips
• Lifetime Exhaust Warranty
• Perfect Fitment – guaranteed

Fitment

AWE’s Warranty

For information on AWE’s warranty terms and conditions, please click here

Purchase Disclaimer: You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts. Bolt Motorsports does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Bolt Motorsports will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls. In accordance with local laws and regulations, Bolt Motorsports will not ship parts to locations where usage or installation of said part would be in violation of the aforementioned acts.