COMP Cams Camshaft 2006+ Dodge 5.7/6.4L Hemi w/VVT

Camshaft Specifications:

• Widest torque curve of any camshaft tested, with impressive low end gains & outstanding high end performance.
• Designed for #26918 spring.
• Requires disabling of the MDS system and use of Non-MDS lifters.
• Requires Custom Tuning.
• Requires Use of camshaft phaser limiter kit (part # 5761) or camshaft phaser lock kit (Part Number 5760).

Camshaft Info:

• Engine Family: Dodge 5.7L and 6.4L HEMI w/ VVT (2009+)
• RPM Operating Range: 1,900-7,000
• Cam Type: Hydraulic Roller
• Camshaft Series: HRT
• Stage: 2
• VVT Limiter Required? Yes
• Advertised Intake Duration: 275
• Advertised Exhaust Duration: 278
• Intake Duration at .050 Inch Lift: 222
• Exhaust Duration at .050 Inch Lift: 230
• Intake Valve Lift: .599
• Exhaust Valve Lift: .604
• Lobe Separation: 115
• Intake Centerline: 109
• Lifter Style: Hydraulic Roller

Fitment

Comp Cams Warranty

For information on Comp Cams warranty terms and conditions, please click here.

Purchase Disclaimer: You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts. Bolt Motorsports does not condone the use of emission defeat devices for any vehicles used on public streets or roadways. Bolt Motorsports will not tamper, remove, disable, or bypass emissions equipment on a motor vehicle in accordance with 40 CFR Section 86.1854.12(a)(3), Clean Air Act 40 CFR 1068.101(b). This includes software, known as tunes, that reprogram a motor vehicles electronic control module to alter engine performance and enable the removal of filters, catalysts, and other critical emissions controls. In accordance with local laws and regulations, Bolt Motorsports will not ship parts to locations where usage or installation of said part would be in violation of the aforementioned acts.